Built to turn everyday frustrations into real wins, every tool in the Onsite+ range makes you rethink what your day looks like with, and without, the right gear.
It’s 6:30 a.m. and your coffee is already half gone. You’ve got a few jobs lined up for the day, the ute’s packed full of tools, but you know there are one or two dodgy drill bits just waiting to derail your whole day.
The drill wanders, a cutter snaps, and your finish is looking less than ideal. A 20-minute job turns into a dilemma, and suddenly you’re making your second trip to the tool shop before lunch.
Maybe it’s something you’ve learned to live with; it comes with the job…right?
But what if it didn’t? What if there were a range of tools designed to take those eye-rolling, frustrating moments and flip them on their head?
That’s exactly why the Onsite+ range exists. Tiny design tweaks that make a lasting difference to your work, your day, and your trade career.
So, what does your day look like, with and without Onsite+?
Stay strong and on track with Onsite+
You’re up on a ladder installing a cable tray WITHOUT the Onsite+ Impact Step Tip Drill Bit…
You line up your drill bit and start drilling, but the bit slides off before it even bites. You climb down, grab a smaller drill bit, and head back up to drill a pilot hole to keep it steady. After swapping back to your original drill bit, you recenter, push harder, and it finally goes through…but it’s slow, and by the end of the day your shoulders are feeling it.
You’re up on a ladder installing a cable tray WITH the Onsite+ Impact Step Tip Drill Bit…
You line up the Onsite+ Impact Step Tip Drill Bit and start drilling. The unique step tip design does the work for you, biting instantly, and it’s exactly where you want it. You are drilling clean and precisely from the first go, no wandering, no wasted effort, and you’re not even having to push that hard. You’re moving fast and staying on schedule.
You are on track with steady progress all day.
Thick materials? No sweat with Onsite+
You’re cutting a hole through an 8mm steel plate for a mounting point WITHOUT the Onsite+ Step Tip Step Cutter…
Your standard cutter works fine at first, but it starts to struggle as you approach full depth. The flute seems to be loading up, the cutter is chattering, and you can feel it straining through the thicker section. By putting it in reverse, you see the cutter is damaged and blunt. You grab a heavier-duty bit and try again — another tool swap, more time and more effort for just one hole and a massive headache.
You’re cutting a hole through an 8mm steel plate for a mounting point WITH the Onsite+ Step Tip Step Cutter…
With the Onsite+ Step Tip Step Cutter, you don’t need to switch tools because it doesn’t slow down when you hit full depth. The deep 10mm steps effortlessly chew through thick plate and double layers of steel. Cutting smoothly, clearing chips cleanly and staying controlled the whole way through. The result is a perfectly round hole, with no burring, binding, blunting, or tool swaps.
It’s one tool, one go, job done.
Run cool and cut clean with Onsite+
You’re on the drill press, cutting hundreds of holes in square tube for a railing project WITHOUT the Onsite+ Step Tip Reduced Shank Drill Bit…
The lubricant is falling off your reduced shank, and the flute starts to clog with chips and swarf. The bit is binding, so you now stop and let it cool to clear the shavings. This bit is already starting to dull halfway through the day, and you know you’ll be back at the tool shop come tomorrow.
You’re on the drill press, cutting hundreds of holes in square tube for a railing project WITH the Onsite+ Step Tip Reduced Shank Drill Bit…
With the black oxide treatment on the Onsite+ Step Tip Reduced Shank Drill Bit, your drilling runs smooth from start to finish. The surface is holding the lubricant, there is little to no heat build-up, and the chips clear easily. This bit stays cool and glides cleanly through the metal.
You’re working with comfort and control.
Four jobs, one tool with Onsite+
You’re drilling holes for a bracket WITHOUT the Onsite+ Step Tip Combination Drill and Tap…
You’re swapping bits to tap the thread, then swapping again to deburr, and finally switching back to drill another hole. It’s repetitive, slow, and time-consuming, involving multiple tool changes for a single job.
You’re drilling holes for a bracket WITH the Onsite+ Step Tip Combination Drill and Tap…
You don’t need to swap your drill bit out to tap the thread because the Onsite+ Step Tip Combination Drill and Tap has four processes in one. You are pre-drilling, drilling, tapping, and deburring in one smooth action. No bit changes, no downtime, the hole is clean, and the thread is exact. The fastener spins in perfectly, and you wonder why you ever did it the old way.
You work through the day without disruptions and achieve fast results.
Cut and clear fast with Onsite+
You’re enlarging holes in a metal switchboard WITHOUT the Onsite+ Step Tip Step Drill…
Your old step drill starts to grab halfway through the process. The bit catches, shakes your wrist, and the edge of the hole becomes rough. After reversing it out and clearing the chips, you’re now spending more time reaming and cleaning up the job rather than the actual drilling.
You’re enlarging holes in a metal switchboard WITH the Onsite+ Step Tip Step Drill…
The Onsite+ Step Tip Step Drill features dual cutting edges that slice through metal cleanly and efficiently. Clearing chips as it goes, there is no rough edges, or grabbing at breakthrough. The finished hole is round, smooth, and ready to go; no reaming or cleanup needed.
You get consistent, clean results with every hole.
Finish like a pro with Onsite+
You’re finishing a job, running screws into a panel WITHOUT the Onsite+ Multi-use 90° Countersink…
The countersink chatters across the surface, and the hole edge tears instead of cutting clean, leaving a rough and uneven finish. You back it out, go slower and tidy it up, but it doesn’t look perfect.
You’re finishing a job, running screws into a panel WITH the Onsite+ Multi-use 90° Countersink…
The Onsite+ Multi-use 90° Countersink features an advanced arc flute that cuts smoothly, resulting in chatter-free holes. The edge is clean, polished and perfectly sized for the screw head. The finish is professional, and you move straight onto the next job without second-guessing.
No chatter, no burrs, just a clean finish you can take pride in.
Job done in one
You’re not stopping to fix problems; you’re not fighting the drill bit. You’re in the zone and everything’s flowing as it should.
Drill with precision, cut with control, finish cleanly, keep your workflow steady, and trust the results. Onsite+ keeps you moving so you can get the job done in one.
Find the full Onsite+ range at your local retail store and feel the difference for yourself.
Where to buy
Store locator is loading from StoreRocket Store Locator App..